The signal from Deck A will go to the Output Channel A ( SL4 Out 0-1) on the audio interface, Deck B will go to Output Channel B ( SL4 Out 2-3) and so on. The outputs will automatically be set in the correct order, which looks like this: Go to Output Routing in the TRAKTOR Preferences.If you are using an external mixer, connect the outputs of your audio interface to the LINE inputs (not PHONO!) of your external mixer. Output Configuration External Mixing Mode Please refer to the documentation of your specific audio device in order to find the procedure explained. Note: Ensure to choose the right input mode depending on your audio device whether you use turntables or CDs. Make sure your audio interface is selected in the Audio Device menu.Īs next step, TRAKTOR's Input Routing needs to be configured: the inputs which your external hardware has been connected to must be assigned to Decks A AND B - this is how it looks:ĭeck A will be controlled by the Timecode signal coming in on Channel A left/right ( SL 4 In 0-1), Deck B by the Timecode signal coming in on Channel B left/right ( SL 4 In 2-3). When the Setup Wizard is finished, open the TRAKTOR Preferences and go to Audio Setup.In the DECK LAYOUT SELECTION, choose 2 Track Decks (Scratch).Run the Setup Wizard by clicking on the Setup Wizard button in the lower left corner of the TRAKTOR Preferences.Connect your turntables or CD players to the IN connectors of the audio interface.Make sure that your audio interface is connected to the computer and receives enough power (use a power supply if necessary).Make sure that the correct driver for your audio interface is properly installed and the device is being recognized by your computer.Make sure TRAKTOR PRO 3 is installed and activated on your computer.In this example, we are using a Rane SL 4 audio interface. The article explains a basic setup with two Timecode-controlled Decks. Note: This still requires the use of TRAKTOR SCRATCH Timecode media and will not work with any Timecodes from 3rd-party manufacturers. TRAKTOR PRO 3 introduces the Scratch for All feature - it now supports any audio device for Timecode control, provided the required audio inputs (PHONO for Timecode vinyl / LINE for Timecode CD) are offered. Once TRAKTOR has been restarted, the selected inputs and outputs of both audio interfaces are now available in TRAKTOR`s Input Routing and Output Routing Preferences.This article explains how to set up TRAKTOR PRO 3 to control playback via Timecode from an external turntable or CD player.Close the ASIO4ALL panel and restart TRAKTOR.Also make sure the respective audio interface is globally activated. Enable the inputs and outputs you want to use by clicking the 'power' buttons in front of each entry.We recommend to not disable any inputs and outputs if your audio interface is affected. Note: Disabling inputs or outputs which already have been active may cause crashes with certain audio interfaces. Now all individual inputs and outputs are visible. Expand the entries of the audio devices you want to use by clicking the small + symbols.Read this article to learn more about latency. Click on the wrench icon to open the advanced settings where you can adjust the latency. If a connected device is not showing up, click on the diamond icon.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |